Kit Reviews

North American P-51D Mustang Tamiya 60322 – 1/32 Review

North American P-51D Mustang Tamiya 60322 - 1/32 Review

North American P-51D Mustang Tamiya 60322 – 1/32 Review

The North American P-51D Mustang is amongst the most famous warplanes of WW2. The Tamiya 60322 1/32 scale model replica of the plane is an accurate and detailed representation of the original aircraft. As an experienced builder of scale models, this review will assess this kit from Tamiya in terms of its accuracy and ease of assembly. It will also explore how well it captures the iconic design elements of the real plane.

The story: The success story of the P-51 began in 1940 when the British Procurement Commission, which was responsible for purchasing American weapons, asked the North American Aviation Company to produce the Curtiss P-40 under license for the British demand for fighter aircraft allowed to. North America was already planning an improved successor, the NA-73. The British ordered 320 pieces, which were later increased to 620 copies.

The clients introduced many improvements to the new aircraft type. Due to these improvements to the NA-73 and despite the same engine as the P-40 Curtiss (Allison V-1710 V piston engine), the NA-73 – referred to by the Royal Air Force as the Mustang I – was considerably faster. But it quickly became apparent that the Mustang the Americans called the type P-51 A because the weak engine at high altitudes could not be used as a fighter aircraft.

After the first combat missions in May 1942, the early model was used as a fast fighter bomber and as a reconnaissance aircraft at low altitudes. Again the British came up with the idea of ​​installing the much more powerful Rolls-Royce Merlin high-performance engine in the Mustang. This engine made the Mustang one of the best fighters of the Second World War and a legend. The Merlin engine was installed in the British from the Mustang II. For the Americans from the P-51 B u. C version.

The US Air Force in particular benefited from this aircraft. It had an enormous range that was increased with additional tanks. This enabled the American bombers to fly deep into Germany and back under fighter protection. It also made a name for itself as a fighter aircraft, as it was equal to or even superior to any German fighter aircraft.

In 1944 an improved version of the P-51 D appeared over Europe. A noticeable feature of the P-51 D was the bubble hood which gave the pilot a very good all-round view. Even after World War II, the P-51 was still used in many countries. For the Korean War, the P-51 D was reactivated, provided with bombs and missiles, and used as fighter bombers. Here, however, they suffered great losses from flak fire. The now-called F-51 machine was still built-in versions H and K and was used by the Air National Guard of the United States. Many specimens are now in museums or in the hands of private users and you can still admire them in flight.

The kit: I finally hold the box, the Tamiya P-51 D in 1:32 scale in my hand. After opening the large cardboard box, my expectations were met. A great kit!

15 injection molded frames with hundreds of finely detailed components. The motor covers are packed in a break-proof cardboard box. In a narrow slip box, there are transparent parts – including three different cockpit hoods – two etched part boards, a bag with small screws, nuts, and the obligatory small screwdriver. There are polyps in another bag. Axes for the mobility of the rudders and flaps should of course not be missing.

And now the highlight. There are small round magnets in a small transparent bag. They hold the engine covers in place. These can then be easily removed and reinserted. Other assemblies also benefit from the magnets.

The Merlin engine alone is a feast for the eyes. The assembly of the piston engine alone devours 6 construction phases. It continues with the cockpit area. Since the kit allows the construction of three versions of the P-51 D, an early P-51 D, and two later versions of the Mustang, the matching instrument panels are included. A transparent part is glued into it and an instrument decal is on it. The impression of glazed fittings is perfectly reproduced. Tamiya has also thought of matching seats for the early and late versions. The seat belts are included in the kit as etched parts. The cockpit area has been accurately staged down to the smallest detail. Every switch and lever has been thought of. The cockpit is almost too good to be built into the fuselage. So, take plenty of photos during construction.

As already written, all rudders and flaps can be made movable by metal axles. The landing gear can also be displayed as retracted and extended. It has been reproduced very well. The brake lines should not be missing either. The rubber tires have a nice profile.

The armament of the P-51 D consists of six Browning 12.7 mm machine guns which, as a model, consist of two halves that are glued together. The ammunition belts are unfortunately only stamped in the ammunition feeder, but that’s okay. The gun bay can of course be opened. Either you leave the maintenance flaps in one piece or cut them apart like the original.

The two variants of the additional tanks are included as external loads. The teardrop-shaped 75-gallon tank and the zeppelin-shaped 108-gallon auxiliary tank. The original was made of cardboard and special paint. They were inexpensive but only held for one use. The 75-gallon tank was made of aluminum and was dropped in aerial combat to reduce the air resistance of the P-51. Since this mostly happened via Germany and the German armaments industry suffered from a shortage of materials, especially when it comes to metals, the Americans wanted to avoid the enemy getting cheap aluminum.

This model of the P-51 D also comes with a masking sheet for the cockpit hood. The masks are cut out individually. A suitable stand is included for presenting the model of the Mustang in flight. It’s a shame that the Mustang cannot be stowed in the box like the Zero A6M2b for better transport of the model. That was a brilliant idea!

Painting, decals, and building instructions: three P-51Ds can be built.

North American P-51D Mustang Tamiya

An early P-51 D of the 79 Fighter Squadron, 20th Fighter Group “GLENGARRY GUY” pilot unknown
A late P-51D of the 487th Fighter Squadron, 352nd Fighter Group “PETIE 2nd” pilot LCOL John C. Meyer
And a late P-51 D of the 334th Fighter Squadron, 4th Fighter Group “Blondie”, no information about the pilot here either
All machines are made of bright metal. Glengary Guy still gets stains in olive drab paint on the hull. The two-part decal sheet is superbly printed. All maintenance instructions are also available. The building instructions are again very well done. As always, it is easy to understand and leads to the perfect Mustang model in 74 steps. Reference is made to the different versions.

For the P-51 D “Blondie” there is also a color print in A3 format. As a bonus, there is also a protective cover in A4 with the cardboard cover of the Blondie machine. As with the Spitfire models, the Mustang comes with a small brochure in English and Japanese. With interesting museum pictures of the P-51 D (detailed photos) and side views of the P-51 A to P-51 K.

Conclusion: There are certainly other Asian model manufacturers, also good P-51 models in the large 1:32 scale. But if you want to call a special P-51 D your own, you can’t avoid the excellent Tamiya model. Attaching the covers with magnets is just incredible.

There is a new Japanese model manufacturer, the Zoukei-Mura company, which has made a name for itself with the models of the Ta 152H-1 and the Japanese experimental aircraft Shinden in the 1:32 scale. This company will also bring out a P-51D. The only question is what can they do better.

Unfortunately, Tamiya P-51 also has its price. This will be well over $140.00. But it’s worth it!

TAMIYA 1/32 P-51D Mustang Scale Model Kit, TAM60322

Kit: North American P-51D Mustang Tamiya 60322
Scale: 1/32
Price: $ 146.99
Manufacturer: Tamiya

North American P-51D Mustang Tamiya 60322 - 1/32 Review
North American P-51D Mustang Tamiya 60322 - 132 Review-2
North American P-51D Mustang Tamiya 60322 - 132 Review-3
North American P-51D Mustang Tamiya 60322 - 132 Review-4
North American P-51D Mustang Tamiya 60322 - 132 Review-5
North American P-51D Mustang Tamiya 60322 - 132 Review-6
North American P-51D Mustang Tamiya 60322 - 132 Review-7
North American P-51D Mustang Tamiya 60322 - 132 Review-8
North American P-51D Mustang Tamiya 60322 - 132 Review-9
North American P-51D Mustang Tamiya 60322 - 132 Review-10
North American P-51D Mustang Tamiya 60322 - 132 Review-11
North American P-51D Mustang Tamiya 60322 - 132 Review-12
North American P-51D Mustang Tamiya 60322 - 132 Review-13
North American P-51D Mustang Tamiya 60322 - 132 Review-Canopy
North American P-51D Mustang Tamiya 60322 - 132 Review-Decal
North American P-51D Mustang Tamiya 60322 - 132 Review-Decal-2
Tam_P-51D_Faltblatt
What’s your Reaction?
+1
0
+1
0
+1
0
+1
0
+1
0
+1
0
+1
0

Leave a Reply

Your email address will not be published. Required fields are marked *