Model Train

Model Train Scales detailed guide 1

Model train scales OO HO

What does Model Train Scales, Rail spacing, Rail Height, and Track Code, Fishplate / Joiner mean?

The scale shows the reduction ratio according to the reality of the model. The use of model products that are reduced/produced using the same scale will ensure that the model area created is accurate and realistic.

There are many generally accepted scale values ​​in the world as well as different scales used by smaller groups. Scales can be represented as numerical proportions (eg 1/87), mostly expressed in letter codes such as HO, OO, N, TT, Z as determined by the standards. NEM and NMRA standards are decisive for the scales and standards are established by these institutions.

The scale indicates the reduction ratio between the real and the model. A model locomotive with a 1/87 scale or HO scale is the fact that its reality is reduced by 1 in 87. If we give an example, the HO scale model of a wagon, which is actually 10 meters tall, will be 11.5 cm in length.

Rail spacing (Gauge) is the distance between two iron rails forming a line on the railway. In most railways in the world, this distance, which we will call the rail spacing, is 1,435 meters (1435mm). When we look at the HO scale, this length corresponds to 16.5 mm (1.65 cm).

For many scales used in model training in its historical development; You can use the table at http://en.wikipedia.org/wiki/Rail_transport_modelling_scales

Almost all scales used in modeling are listed at http://en.wikipedia.org/wiki/List_of_scale_model_sizes

Here are some examples of some scales that manufacturers use popularly.

CodeRateRail Range
Z1:2206.5mm
N1:1609mm
TT1:12012mm
HO1:8716.5mm
OO1:7616.5mm
On30 1:4816.5mm
O1:4532mm
11:3245mm

Model train scales comparison chart

You can take advantage of the image below for locomotives and wagons for HO, TT, N, and Z.

Model Train Scales

Different sizes can be seen on HO-OO-On30 models using the same rail spacing. It is thought that there is a serious difference, especially between OO and HO. However, you have the opportunity to evaluate this difference in the photos below.

  • Model Train Scales detailed guide 1 1
  • Model Train Scales detailed guide 1 2
  • Model Train Scales detailed guide 1 3
  • Model Train Scales detailed guide 1 4
  • Model Train Scales detailed guide 1 5
  • Model Train Scales detailed guide 1 6
  • Model Train Scales detailed guide 1 7

Model train rail spacing dimensions

You can find a comparison image below for common rail spacing measurements.

You can find a comparison image below for common rail spacing measurements.

You can use the http://en.wikipedia.org/wiki/Category:Model_railroad_scales for all information used for model train scales and for companies producing at these scales.

The track height (Track Code) indicates the height of the rails on the railway from the ground. Along with the height, the thickness also makes some difference. In real life, heavier / thicker rails are used on the main lines, and lighter rails are laid on the secondary roads.

Model rails are also available in different height rail types and are expressed in inches per the height of the rail from the top of the crossbar. While the rails produced by model train manufacturers are generally used at a single height and often different height from company to company, some private companies also produce model rails of different height.

Commonly used values ​​are 100.83, 70, and 55. If you are making your main lines with Code 100 rails in a realistic setup, you should make the secondary/sidelines with code 83 rails. You can find the recommended values ​​for rail heights and thicknesses at http://www.nmra.org/standards/sandrp/rp-15_1.html

Code RayHeight (A)Rail Thickness (C)
100.100inç=2.54mm1.14mm
83.083inç=2.10mm1.02mm
70.070inç=1.78mm0.89mm
55.055inç=1.40mm0.71mm
Height of Model Train Rail profiles

Height of Model Train Rail profiles

Rail profiles may have different heights for different manufacturers. In other words, one manufacturer can produce Code 100 rails while another can produce Code 83. For this reason, the height difference may arise between the rails of different manufacturers, but with a small filing process, the protrusion on the rail surface can be removed, and the transition adapters used by some manufacturers can be used.

Rail joiners (Fishplate / Joiner) are small metal or plastic parts that allow the rails to transmit electricity to each other. The metal ones of these parts make the rails united and electrically unified. In special applications such as understanding line usage, the method of cutting rails in some regions on the fiction or plastic connectors is used.

Rail joiners

Leave a Reply

Your email address will not be published. Required fields are marked *