Get Special Hobby & CMK Kits for October…
The iconic British flying boats kit
Model is available in limited quantities of 500 kits. This box includes eleven different styrene parts including a clear part, resin casting and frets of etched detail. Full-colour instruction booklet and decals cater for four colour schemes, two of which depict machines flown in Malaya and Korea, one boat that took part in the Berlin Bridge and one French machine from Lanveoc-Poulmic naval base in 1951.
– highly detailed model with accurate dimensions and shape
– fine recessed panel lines
– large decal sheet made by Cartograf, including full set of stencils
– colour schemes for three RAF machines and one of the Aeronavale
Bloch MB.210 Mask
Manufacturer: Special Hobby
1/72nd scale
Pre-cut spray masks for the Bloch MB.210 kit that we have made for Azur/Frrom.
Manufacturer: CMK
1/35th scale
Product Code: 129-3151
Kitbags hanging on the vehicle sides, sacks, rolled tarpaulin and camouflage net and seat cushions for the Zvezda kit. All these items can be used to upgrade your Dodge CW-51 model.
TBM-3E Avenger Conversion Set for Accurate/Academy kits
The TBM-3E was a light weight version of the Avenger that began to leave production lines in 1944. This improved performance was made possible by the APS-4 radar installed under the wing. This conversion includes both external and interior modifications. It offers a new forward fuselage, blank-off pieces for the belly gunner’s position, an arrestor hook and starboard wing radio set. The conversion parts are 3D-printed and cast in resin. The Accurate miniatures model, or re-boxes of the Accurate miniatures kit by Italeri or Academy. The decal sheet offers markings for two US Navy machines that flew in the PTO in the final stage of WW2.
B-26B/C Marauder Waist Guns, Ammo Boxes and Feed for ICM kit
Manufacturer: CMK
1/48th scale
Product Code: 129-4485
3D-printed set that covers the waist window machine guns with their ammo boxes and ammo belts. These details are missing in the kit, but they’re visible through the side windows.
B-26 Dorsal Turret Upgrade Set for the ICM kit
Manufacturer: CMK
1/48th scale
Product Code: 129-4487
3D-printed set that offers new machine guns with their ammunition belts and tracks. Kit only allows horizontal position. The kit allows only horizontal position though.
TBF-3/TBM-3 Avenger Dinghy Box
Manufacturer: CMK
1/48th scale
Product Code: 129-4490
cast set of the opened dinghy compartment that was located in front of the gun turret, and so this extra detail can be very well seen on your model.
ResinRAF Bomb sight Mk IXA
Manufacturer: CMK
1/32nd scale
Product Code: 129-P32003
This British bomb sight was utilised on many British WW2 aeroplanes as was the Mosquito or Lancaster. 3D print with a fret of etches.
Hetzer Exhaust (final type) for Academy/ Takom kit
Manufacturer: CMK
1/35th scale
Product Code: 129-P35032
The final variety of Hetzer exhaust stub, made by direct 3D print. Designed for Academy and Takom kit sets.
MG 3 on Leopard Mount for Tamiya, Revell and ICM kits
Manufacturer: CMK
1/35th scale
Product Code: 129-P35033
3D-printed set portraying the MG3 machine gun with an ammo box on a mount specific to the Leopard tank. Comes with a fret of etches.
Wehrmacht Bicycle (2 pcs)
Manufacturer: CMK
1/48th scale
Product Code: 129-P48018
The bicycle was not only a means of transport or sport for civilians. Many armies adopted the bicycle in early 20th-century because it can be used to carry a large amount of weight and was faster than walking. Bicycles were in use by the German Army even before World War I. The new, rebuilt Wehrmacht also introduced the invention in the 1930s and continued to use it up until the end. Many a photograph illustrates wide use of bicycles in the military, and they often carried even a machine gun or up to two Panzerfaust weapons.
These 3D-printed bicycles come 3D-printed in top quality. The first one has a Panzerfaust, and the frame of its other bicycle is a box that can hold grenades. We have made a 1/72 bicycle set for you, and now we feel it is time to upscale it for quarter scale modellers. Having made a 1/72 bicycle set for you, now we feel it is the right time to upscale it for quarter scale modellers, too.
P-40 Wing Bomb Racks (w/plywood support boards)
Manufacturer: CMK
1/72nd scale
Product Code: 129-P72033
A pair of wing bomb racks that were used on P-40 Warhawk / Kittyhawk fighter bombers. This set includes the plywood side boards and bombs. It is 3D-printed. This set was designed to be compatible with the SH72502 but it can also be used for any other P40 Warhawk/Kittyhawk release.