How to Applying AK Interactive 452 Tru Metal: Metallic Purple

Here’s how to apply AK Interactive 452 True Metal: Metallic Purple:

Materials:

• AK Interactive 452 True Metal: Metallic Purple
• Fine-pointed brush
• Cotton swab (optional)
• Airbrush (recommended) with a 0.2mm – 0.4mm nozzle
• Airbrush thinner compatible with AK Interactive paints (e.g., AK Interactive Xtreme Cleaner/Thinner)
• Airbrush cleaning supplies
• Model properly primed and prepped (smooth surface, free of dust and grease)

Choosing your application method:

You can apply AK Interactive 452 True Metal: Metallic Purple with either a brush or an airbrush.

Applying with a brush:

1. Stir the paint gently with a toothpick or a thin wire to ensure even consistency.
2. Dip your brush lightly into the paint. A small amount is enough, as too much can be difficult to control and leave streaks.
3. Apply the paint in thin, smooth layers to the desired areas. Build up the coverage gradually instead of applying one thick coat.
4. While the paint is still slightly wet, use a cotton swab to gently blend and smooth out any brushstrokes.

Applying with an airbrush:

1. Thin the paint with appropriate thinner according to the manufacturer’s instructions. AK Interactive recommends a 1:1 (paint:thinner) ratio for airbrushing.
2. Fill your airbrush with the thinned paint and adjust the pressure to a low setting (around 10-15 psi).
3. Hold the airbrush perpendicular to your model’s surface, maintaining a distance of 10-15 cm.
4. Apply the paint in thin, even layers, using a “pull” technique. Start outside the desired area and slowly move the airbrush inwards, creating a smooth transition.
5. Build up the coverage gradually with multiple thin layers instead of applying one thick coat. This helps achieve a smooth and even metallic finish.
6. Rotate your model as you apply the paint to ensure even coverage on all sides.

Additional Tips:

• Practice on a scrap piece of plastic or a spare model part before applying the paint to your actual model. This allows you to experiment with the application method and desired effect.
• Work in a well-ventilated area and wear a mask when airbrushing to avoid inhaling paint fumes.
• Clean your brush or airbrush thoroughly after use to prevent clogging and maintain optimal performance.
• Allow the paint to dry completely before handling your model. This usually takes several hours, depending on the number of coats applied and ambient conditions.

Remember: Patience and practice are key to achieving a smooth and even metallic finish with AK Interactive 452 True Metal: Metallic Purple.

$15.95 AK AK452 True Metal Metalic Purple (20g)

How to Applying AK Interactive Xtreme Metal