The ten new releases in our preview include sets for your Mossie, Sea Fury & Yak…
Barracuda Studios ten new sets in two scales to upgrade your Mossie, Sea Fury & Yak…
Barracuda Studios a twelfth set of detail parts. Sets for your Mossie, Sea Fury & Yak are amongst the ten new releases in our preview…
Barracuda Studios ten new sets in two scales to upgrade your Mossie, Sea Fury & Yak…
Airfix released a two stage Merlin powered Mosquito B MK XVI back in 2021 and followed it up with a PR XVI last year. The kit is very well done, but it could do with some attention to detail. These sets will add a very visible level of detail to your Mosquito! These sets will add a very visible level of detail to your Mosquito!
Barracuda has also released two styles of Zero length rockets as fitted to the Sea Fury, which will add that last bit of detail to the Airfix Sea Fury kit that we have done quite a few other upgrade sets for. The batch ends with a cool 1/32 set, perfect for those who like to build in large scale. Do not be alarmed, this batch heavily favors 1/72. Next batch is mainly large-scale sets.
Mosquito B Mk. XVI Vac Canopy
1 : 72nd scale
BR72462-
Price : $4.95
This kit consists of a clear vac-formed bomber canopy, with bulged sides windows. This set is used by many B Mk. The canopy is compatible with Mk. 35 Mosquitos. The real plane has internal frames, not external ones, and bulging side windows. This upgrade will make it easier to view the cockpit. Master pattern and vac formed parts by Falcon Models.
Mosquito PR Mk. XVI Vac Canopy
1 : 72nd scale
BR72463-
This kit consists of a clear vac-formed canopy that has bulged windows on both sides and a teardrop on top. This set is used for many PR Mk. The set includes a crystal clear vac formed canopy with bulged side windows and a teardrop blister on the top as used by many PR Mk. The real Mosquito has internal frames, not external ones, and bulging side windows. This upgrade will make it easier to view the cockpit. Master pattern and vac formed parts by Falcon
1:72nd scale
BR72464
Price: $6.95
This set consists of a pair of accurate, 3D printed mainwheels, featuring detailed early style slotted hubs, block tread tires and raised tire data. Fitted to the early Mk IV Bomber, PR version and NF II Night Fighter. A simple detail upgrade that you can install on your Mosquito. Gerry Mos. CAD. Gerry Mos.
Mosquito Mainwheels Block Tread
1 : 72nd scale
BR72466-
Price : $6.95
This is a set of two accurate 3D-printed mainwheels, with late style solid hubs, block tread tires, and tire data. All Mosquitos up to and including the Mk VI. The Mosquito Mk XVI Nacelles Upgrade Set is designed for the Tamiya, Hasegawa and other kits by Gerry Mos. This upgrade kit includes a complete set of nacelles for Mosquito Mk XVI. It is designed for Tamiya and Hasegawa kits. It is easy to install and does not require surgery. Your model will be enhanced with additional detail. CAD by Mike O’Hare.
Mosquito Mk XVI Landing Gear Upgrade
1:72nd scale
Price: $14.95
This set contains a complete replacement for the Airfix Mk XVI kit’s landing gear. CAD by Mike O’Hare.
Mosquito Mk XVI Landing Gear Upgrade
1:72nd scale
BR72468
This set contains a complete replacement for the Airfix kit’s landing gear. Landing gear legs, retracts, and mudguards, all 3D-printed, are provided in one single piece. Mainwheels, mudguards, and mudguards, however, can be purchased separately. A complete tailwheel, with an anti-shimmy tire as well as a detailed leg is also included. The upgrade is highly visible, with fine door guards to make your model stand out! CAD by Mike O’Hare.
Mosquito Mk XVI Landing Flaps – Down
BR72469
1:72nd scale
Price: $10.95
This
set contains 3D printed port and starboard flaps moulded in down position. CAD by Mike O’Hare.
Mosquito Mk XVI Landing Flaps – Down
BR72469
1:72nd scale
Price: $10.95 This
set Contains 3D printed port and starboard flaps moulded in down position. Mosquito kits do not allow you to place the flaps down. The flaps seem to float in the air when they are lowered. The connection points are small and fragile. However, Mike came up with an innovative solution to provide the outer and inner flaps for each wing in a single piece. This also helps aligning. This is a pretty neat trick that only involves removing some ribs from the inside of the wings. CAD by Mike O’Hare.
Sea Fury RP-3 Rockets and Rails
BR48526
1:48th scale
Price: $14.95
This set contains six super detailed, 3D printed 3-inch rockets and rails as carried by
Sea Furies and other f/c. Sea Fury RP-3 Rockets and Rails
1 :48th Scale
Price $14.95
This is a set of six 3D-printed 3-inch rockets and Rails that are carried by
Sea Furies and other aircraft. This set contains six super detailed, 3D printed 3-inch rockets and rails. They are carried by
Sea Furies and other a/c. The 60 lb. The fins and rocket heads have a nice thin finish. This is a simple upgrade to the kit’s simplified parts. Airfix, Trumpeter and other kits. CAD By Craig Sargent. .
BR48527
1/48th Scale
Price $14.95
This kit contains 4 super detailed 3D-printed 2-tier rockets with rails as used by Sea Furies, and other a/c. (8 rockets per pair). Rockets and rails have been printed in one piece. The folded metal clips which hold the rockets to the rails do not look solid but rather accurately reflect the gaps between the clips. The 60 lb. The fins and rocket heads have a nice thin texture. Rockets also mounted accurately, the rear clip of the lower rocket attaches to the exhaust, and not the fins as in the kit. For Airfix and Trumpeter kits. CAD By Craig Sargent.
YAK-9T/K 37mm & 45mm Cannon Barrels01001010BR32514 01001010This set contains one each super detailed, 3D printed NS-37 37mm cannon barrel and an NS-45 45mm cannon barrel with muzzle brake. A hollowed-out barrel is also included for the machine gun mounted on the cowl. 01001010 Designed for 1/32 ICM Yak-9T or Yak-9K models. This upgrade is a simple one that will add a ton of detail in the right places. Mike Swinburne designed this.